公司LOGO-(2)

  • English
Email:pcba23@pcb-smt.net

News

FASTPABA 15 years' experience for PCB Assembly.

Company News

1212
What is the difference between PCB and PCBA?

What is the difference between PCB and PCBA?

What is the difference between PCB and PCBA? PCB refers to the circuit board, while PCBA refers to the circuit board plug-in assembly, SMT process. One is a finished board an...

Learn More +
1611

Printed Circuit Boards Thermal Design Introd...

Electronic devices will get hot during work. The failure rate of electronic products increases exponentially with i...

1611

Surface assembly process design principles

Typical surface assembly methods include full surface assembly, single-sided mixing, and double-sided mixing. Full ...

1511

Solder paste printing principle

Solder paste printing is the first step in the SMT assembly process, and its function is to distribute solder paste...

1411

Wave soldering process parameter setting req...

Frequently debugging wave soldering process parameters include component surface preheating temperature, soldering ...

1311

Flux behavior in wave soldering

During wave soldering, the flux will partially evaporate during the preheating phase, cleaning the surface to be so...

1211

PCB manufacturing reliability definition

Although there is a consensus that reliability is an important attribute of PCB manufacturing products, the definit...

1111

Selective wave soldering advantage

Selective wave soldering is a special form of wave soldering invented to meet the requirements of modern welding pr...

1111

PCB manufacturing reflow soldering process r...

Reflow soldering is a key process for PCB manufacturing SMT and must be carried out under controlled conditions. Th...

0911

SMD adhesive composition, storage and use pr...

The SMD adhesive is usually composed of a matrix resin, a curing agent, and a curing accelerator, a toughening agen...

0811

Pcb manufacturing affecting solder paste pri...

The factors that pcb manufacturing affects solder paste printing include three aspects, namely solder paste perform...

0711

Printed circuit board reliability affecting ...

Printed circuit board reliability depends on three aspects: 1. Design - poor design buried inherent reliability is...

0611

PCB manufacturer's advice on controlling tin...

At present, the most common method for inhibiting the growth of tin whiskers by PCB manufacturers is to plate the S...

0611

Prototype pcb manufacturing good joints mech...

The four most important characteristics of the prototype pcb manufacturing joint are: shear strength, creep, isothe...

0511

PCB manufacturing solder paste printing comm...

By controlling the various links of the pcb manufacturing printing process, various defects often appear in printin...

0511

Why does the pcb supplier choose no-clean so...

With the protection of the atmospheric ozone layer, the in-depth development of Ozone Depleting Substances (ODS) an...

0511

PCB fabrication reflow process advantages

Choosing the right pcb fabrication welding process has a large impact on the quality of the solder joints after ass...

0511

PCB Board

PCB is an abbreviation for printed circuit board. A printed wiring board is a printed board on which a point-to-poi...

0411

Pcb supplier reflow solder ball generation c...

In pcb supplier circuit board manufacturing, the generation of solder balls is closely linked to the soldering proc...

0411

What are the typical SMT processes?

What are the typical SMT processes? A printed circuit board assembly that is assembled using surface mount technol...

0211

Electronic circuit board manufacturng 5s man...

5s management is the basis of on-site management. The 5s management originated in Japan and refers to the effective...

FASTPCBA Technology Co.,Ltd

  • 3/F. 1/B, 18-2 Yuquan East Rd. Yulv Village.
    Guangming New district. Shenzhen. China.
  • T:400-930-9399 F:86-0755-26978080
  • pcba23@pcb-smt.net
Copyright © FASTPCBA Technology Co.,Ltd All Rights Reserved      Powered by:NSW CNZZ